The difference between the connections is in the number of conductors in the power cable that enters the house from the public grid. With a three-phase connection, power is distributed over three separate phase wires, whereas with a single-phase connection, power all enters on 1 phase wire. This means that with a three-phase connection, less power is required per phase, and therefore smaller fuses are used (e.g., 25 amps), whereas with a single-phase connection, the fuses are larger, e.g., 40 amps.
Today, most new homes get a 3-phase connection, in part because some appliances in the home today require power steam, or 3-phase power, to function. These include appliances that require a lot of power such as larger induction cooktops or heat pumps.
-
1-phase and 3-phase: what is the difference?
The difference between the connections is in the number of conductors in the power cable that enters the house from the public grid. With a three-phase connection, power is distributed over three separate phase wires, whereas with a single-phase connection, power all enters on 1 phase wire. This means that with a three-phase connection, less power is required per phase, and therefore smaller fuses are used (e.g., 25 amps), whereas with a single-phase connection, the fuses are larger, e.g., 40 amps.
-
The most common connection
Today, most new homes get a 3-phase connection, in part because some appliances in the home today require power steam, or 3-phase power, to function. These include appliances that require a lot of power such as larger induction cooktops or heat pumps.
Two types of inverters
Inverters for solar panels come in both single-phase and three-phase. The single-phase models are usually slightly cheaper than the three-phase ones, and also come in smaller versions. For example, manufacturer SMA has inverters from 1.5 to 2.5 kiloWatts only in a single-phase version, while from 3 kiloWatts or larger you can choose between a single-phase or three-phase variant. For hybrid inverters, the smallest 3-phase models start from 5 kW, while the single-phase variant starts as low as 3.6 kW.
Important to know: Three-phase inverters can only be connected in a three-phase grid, while single-phase ones can be installed in both single- and three-phase grids.
An SMA single phase hybrid inverter
Why would you choose one or the other?
Grid operators want the power flowing on the various phases to be balanced: in other words, as much of the same consumption and production on each phase as possible. Therefore, the rule is that if you connect more than a certain amount of your own power production to the grid, you are required to distribute it among the phases. That limit is 5 kiloWatts, which is why the largest single-phase inverter offered by Zonnefabriek is the Sunny Boy 5.0TL or SE of 5 kW AC power. If the power is less than 5 kW then it makes so little difference to the “imbalance” that grid operators have no problem allowing the inverter to be connected to only 1 phase. Therefore, because of the lower cost of a single-phase inverter, such a model is often chosen.
If you put the inverter on only one of the three phases, what about feed-in? Suppose you are feeding power back to the grid on one phase, while at the same time taking power from another phase, is this recorded separately by the kWh meter? The answer is no. The grid operator's kWh meter, including the 'smart' meter, internally calculates what happens on the various phases. Two kilowatts of power entering the grid on phase 1 while simultaneously drawing 1 kW of power from the grid on phase 2 and 1 kW from the grid on phase 3 means that, on balance, no power is accounted for: both the off-take counter and the feed-in counter remain at the same position. Anyway, a smart meter can never register both off-take and feed-in at the same time: It is one or the other.
On phase 1, two kW flows out of the house and on each of phases 2 and 3, one kW flows into the house. The resulting balance is zero
Connection & abolition of the balancing scheme
The issue of feed-in is not so relevant at the moment, because the net-metering scheme ensures that energy that is fed back has the same value as energy that is purchased: it is offset against each other, so to speak. The net-metering scheme continues until 2027.
But even after 2027 there is no problem if an inverter is connected to only 1 of the 3 phases. The smart meter balances everything out. On our product page for inverters and optimizers you will find all 1- and 3-phase inverters that Zonnefabriek offers.
